Cone Crusher

Application of cone crusher: The crusher of this series is suitable for crushing varies of medium hard and above medium hard ores and rocks. The spring release system of crusher act as an overload protection system that allows tramp to pass through the crushing chamber without damage to the crusher, use dry oil, water, two kinds of sealed formation. It made plaster stone and engine oilseprate, assured reliable performance. The type of crushing chamber depends upon the size of feed and fineness of the crushed product. The standard type is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head is applied to fine crushing. Cone crusher Operating principle: During operation, the motor drives the eccentric shafts shell to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. Technical parameters: ModelDiameter (mm)Feed Opening (mm)Range of Discharge Opening (mm)Capacity(t/h)Power (kw)Speed of Eccentric Shalt(min)Weight (t)Overall dimension L×W×H(mm)PYB600600756512-153035652234×1370×1675PYD60060040353-13303565.52234×1370×1675PYB90090013511515-505533311.22692×1640×2350PYZ90090070605-205533311.22692×1640×2350PYD90090050503-135533311.32692×1640×2350PYB1200120017014520-5011030024.72790×1878×2844PYZ120012001151008-25110300252790×1878×2844PYD1200120060503-1511030025.32790×1878×2844PYB1750175025021525-5016024550.33910×2894×3809PYZ1750175021518510-3016024550.33910×2894×3809PYD17501750100855-1316024550.23910×2894×3809PYB2200220035030030-60280/260220804622×3302×4470PYZ2200220027523010-30280/260220804622×3302×4470PYD220022001301005-15280/26022081.44622×3302×4470